LVL beams over treated pine wall frames and roof trusses

LVL beams, glulam beams and framing timber, delivered

LVL and glulam beams for lintels, wide openings, long spans and exposed rafters, plus the pine for anything your carpenter cuts on site. Delivered anywhere in NSW.

What we supply

LVL lintels and beams

LVL in 35 and 45 mm thicknesses for lintels, beams, rafters, tall studs and plates. Two 45 mm members side by side fill a 90 mm wall. We supply the grade and size your plans or engineer specify.

LSL beams

63 mm LSL beams from 150 to 300 mm deep. One LSL beam often does the job of two LVLs nailed together, which saves your carpenter time.

Glulam beams

Glulam (GL) beams for long spans, heavy loads and exposed work, ordered in for the job. Cambered beams suit long single spans, and H3 treated beams suit outdoor and exposed use.

Pine framing

Structural pine in MGP10 and MGP12 grades, in the framing sizes your job calls for. Send your cutting list or your plans and we'll match it.

LVL, LSL or glulam: which beam?

LVL (laminated veneer lumber) is made from thin veneers glued together with the grain running along the length. It's straight, strong and consistent, and it covers most lintels and beams in a timber-framed home.

LSL (laminated strand lumber) is made from long wood strands pressed into thick sections. A 63 mm LSL beam is a single piece where LVL would need two laminated together.

Glulam (glued laminated timber) is built up from layers of sawn timber into deep beams. Its deeper sections span further and carry more than LVL or LSL, and it looks good left exposed under a raked ceiling or on a verandah.

Your engineer or the frame design sets the size. If neither has yet, send the plans and we'll tell you what the job is likely to need.

Beams delivered with your order

LVL, LSL and glulam come on the same truck as your frames, trusses or timber, anywhere in NSW.

Request a quote

Glulam instead of a steel beam

On some jobs a glulam beam can replace a steel beam, depending on the span and the load it carries. It keeps the structure in timber, it's lighter than steel, your carpenter can cut and fix it, and it looks good left exposed.

Glulam is usually deeper than steel for the same load, and the swap is your engineer's call. Send the plans and the engineer's drawings and we'll check each beam case by case. Read more in can a glulam beam replace a steel beam?

Not sure what a lintel needs?

Send the plans and the engineer's drawings, and we'll supply the sizes they specify.

Request a quote

When timber suits better than prefab

Small alterations, renovations that change as walls come down, and very small jobs are often easier to cut on site. Many jobs mix the two, such as a hand-cut extension under prefabricated roof trusses. See prefab frames vs stick building.

We deliver timber anywhere in NSW, with recent jobs as far as Jindabyne, Mudgee and Gulgong.

Ready to order?

Pick "Timber for cut on site" on the quote form and attach your list or plans.

Request a quote

Timber questions

What grades of pine do you supply?

Structural pine in MGP10 and MGP12 grades, in the framing sizes your job needs.

What sizes of LVL do you supply?

LVL in 35 and 45 mm thicknesses, in depths to suit lintels and beams, and 63 mm LSL beams from 150 to 300 mm deep. Bigger beams, such as glulam, are ordered in for the job. Send your plans or the engineer's drawings and we'll supply what they specify.

Do you deliver LVL beams to the job site?

Yes. We deliver LVL, LSL and glulam beams to site anywhere in NSW, on their own or with your frames, trusses and timber.

Can a timber beam replace a steel beam?

Sometimes. A glulam beam can replace steel on some jobs, depending on the span and the load. Your engineer decides, and we check it case by case.

Got plans? Get a price.

Attach your plans to the quote form. You'll usually hear back within 24 to 72 hours.

Request a quote
Call Get a quote