Frame and truss supplier for Western Sydney
Prefabricated wall frames, roof trusses and floor trusses for Western Sydney builders, from Parramatta and Blacktown to Penrith, Liverpool and Campbelltown, made in West Gosford and delivered to site.
A second plant for a busy market
Western Sydney builds more homes than anywhere else in NSW, and local truss plants are often booked out at the busiest times of year. Our plant has capacity for more than 500 homes a year, so a single job or a whole build program can keep moving.
Every job is detailed in Pryda software from your plans before anything is cut, so openings, wall heights and set-downs are checked against the drawings, not discovered on site.
Knockdown rebuilds, duplexes and granny flats
Much of the building in established Western Sydney is on existing blocks: knockdown rebuilds, dual occupancies, granny flats and extensions, mostly on a slab. We supply the wall frames and roof trusses, and the floor trusses or I-joists and flooring when there's an upper floor.
Builders with a regular program can apply for a trade account.
Where we deliver in Western Sydney
Including:
- Parramatta
- Blacktown
- Penrith
- Liverpool
- Campbelltown
- Fairfield
- Bankstown
- Mount Druitt
- St Marys
- Seven Hills
- Merrylands
- Granville
- Auburn
- Cabramatta
- Prestons
- Hoxton Park
- Wetherill Park
- St Clair
- Glenmore Park
- Jordan Springs
- Mulgoa
Not listed? We deliver all around NSW. Put the site suburb on the quote form and delivery is included in the price.
Request a quoteSite conditions in Western Sydney
Every job is designed to the wind classification, BAL rating and any snow load on your plans. Here's what tends to come up in Western Sydney. See how the ratings change your frames and trusses.
Slab set-downs
Most Western Sydney homes are on a slab with set-downs for wet areas, garages and alfresco areas. Frame heights are set from the slab levels on your plans, so mark every set-down and we'll detail the frames to suit.
Hot summers
Penrith and the western plains have some of the hottest summers in Sydney, so many designs call for wide eaves, light roofs and plenty of insulation. Eave widths and the roof material go straight into the truss design, so put them on the plans.
Bushland edges
Lots near the Blue Mountains foothills, around Glenmore Park and Mulgoa, and along creek and bushland reserves, can carry a BAL rating. We design to the BAL rating on your plans.
Frames, trusses and floors for Western Sydney
Made in West Gosford to your plans, with flooring delivered with them if you need it.
Prefabricated wall frames
90 × 35 and 90 × 45 studs in pine or LVL, detailed to the slab set-downs on your plans.
Roof trusses
Standard, scissor and hardwood trusses, and rafters.
Floor trusses and I-joists
Posi joists with timber or steel webs, and I-joist floor systems.
Timber and beams
Pine in MGP10 and MGP12, LVL, and glulam beams for anything cut on site.
Western Sydney questions
Do you cover the new estates in the north west and south west?
Yes. Box Hill, Gables, Marsden Park, Oran Park, Austral, Leppington and the other growth areas are all on our Sydney run. North West Sydney and South West Sydney have their own pages.
Can you supply a volume program in Western Sydney?
Yes. Our plant has the capacity to deliver more than 500 homes a year. Talk to us about your program and we'll plan production around it.
Do you supply granny flats and duplexes?
Yes. Send the plans for a granny flat, duplex or dual occupancy the same way as a house, and we'll price the frames, trusses and any floor system.
Nearby: North West Sydney, South West Sydney, Sydney, Blue Mountains. Or see everywhere we deliver in NSW. Owner builder? Start with how to prepare plans for a quote.